EHSS 100 - Introduction to Environmental Health and Safety - 3.00 credits
This course for non-EHS students is a review of environmental and health and safety regulations published by the EPA, DOT, OSHA, and the states regulatory agencies. This course emphasizes hazard identification, avoidance, control, and prevention. The topics will include clean air, clean water, hazardous waste, hazard communication, fall protection, confined space, respiratory protection, and personal protective clothing. Passing students meeting the attendance requirement will receive an OSHA 30-hr Outreach Card for General Industry.
EHSS 101 - Hazardous Waste Operations and Emergency Response (HAZWOPER) - 3.00 credits
This course provides a review of hazardous waste operations, handling, and regulations for facilities and hazardous waste sites. In addition, medical monitoring programs, engineering controls, respiratory protection, personal protective equipment, sampling techniques, air monitoring equipment, hazardous waste documentation, and incident command system (ICS) will be covered. This course meets the requirements of OSHA's HAZWOPER regulation (29 CFR 1910.120(e). Upon satisfactory completion students will receive a 40-hr HAZWOPER certificate.
EHSS 110 - Properties and Hazards of Hazardous Materials - 3.00 credits
This course covers the recognition and communication of the physical, chemical and health hazards of hazardous materials based on the nine DOT hazard classes, NIOSH Pocket Guide and EPA's definition of characteristic hazardous waste. Included are toxic, corrosive, reactive, flammable and combustible liquids, compressed gases, LP-gases and cryogenic liquids. Upon satisfactory completion students will receive an OSHA 2015 (Hazardous Materials) certificate.
EHSS 111 - Introduction to Health and Safety for General Industry - 1.00 credits
This course provides the participants with an overview of the Occupational Safety and Health Administration (OSHA) standards relevant to general industry. Among the subjects covered in the program are: an introduction to OSHA, fire protection, electrical safety, hazard communication, bloodborne pathogens, walking and working surfaces, personal protective equipment, machine guarding and safety and health programs. Students will receive a 10-hr General Industry Safety and Health Outreach Card.
EHSS 112 - Introduction to Health and Safety for Construction - 1.00 credits
This course provides the participants with an overview of the Occupational Safety and Health Administration (OSHA) standards relevant to general industry. Among the subjects covered in the program are: an introduction to OSHA, stuck by, and caught in/between, excavations, electrical safety, health hazards, walking and working surfaces, stairs and ladders, tool ¿ hand and power, personal protective equipment, fall protection and safety and health programs. Students will receive a 10-hr Construction Safety and Health Outreach Card.
EHSS 200 - Safety and Health Regulations and Standards - 3.00 credits
A comprehensive overview of OSHA and other health and safety regulations and guidelines. Subject areas include OSHA history, specific regulations regarding walking and working surfaces, hazard communication (hazcom), confined spaces, personal equipment, electrical, machine safeguarding, exit routes/fire protection, lockout/tagout, welding, and recordkeeping. In addition, hazard recognition and safe work practices will be covered. Upon satisfactory completion students will receivecertificates in OSHA 511 (OSHA Standards Course for General Industry) and OSHA7845 (OSHA Recordkeeping).
EHSS 202 - Transportation and Storage of Hazardous Materials - 3.00 credits
A presentation of detailed information required for the handling, transportation, and storage of hazardous materials. Procedures for safe handling, storing, and preparing hazardous materials for shipment by all modes of transport as required by applicable Department of Transportation (DOT) regulations will be covered. Students will use reference materials, labeling, and preparing materials for shipment. Students will also learn the critical competencies required for properly responding to hazardous material emergencies. Upon satisfactory completion students will receive a 40-hour HAZMAT certificate in 49 CFR 171-180.
EHSS 203 - Environmental Regulations - 3.00 credits
This course provides a comprehensive overview of EPA and other environmental regulations and guidelines. Subjects included in this course are: EPA history, specific regulations regarding surface water (CWA), air (CAA), drinking water (SDWA), hazardous waste (RCRA), Superfund (CERCLA), Endangered Species (ESA) and Community Right-to-Know (EPCRA).
EHSS 204 - Emergency Preparedness and Planning - 3.00 credits
Prerequisite: EHSS 101. This course will cover a broad range of proactive and regulatory approaches to emergency planning. Analysis techniques, methods of auditing and conducting hazard assessments are covered. Subject materials are presented for students working in industry as well as the public sector of emergency planning and incident response. Upon satisfactory completion students will receive certificates in FEMA IS 100, IS 200 and OSHA 7105 (Evacuation and Emergency Planning).
EHSS 205 - Principles of Industrial Hygiene - 3.00 credits
Prerequisite: EHSS 200 with a grade of C or higher or concurrent enrollment. This course is presented to provide the fundamentals of hazard identification and control related to industrial applications and worker health exposures. Information is given in key areas that cover recognition, evaluation, and control of toxic materials and the effects on the body, radiation, noise, ventilation, thermal stress and ergonomics. Upon satisfactory completion students will receive a certificate in OSHA 521 (Guide to Industrial Hygiene).
EHSS 210 - Incident and Accident Investigation - 3.00 credits
Prerequisite: EHSS 200 with a grade of C or higher or concurrent enrollment. This course provides an introduction to basic accident investigation procedures and describes accident analysis techniques. This course will provide students with the basic skills necessary to conduct an effective accident investigation at their workplace and make recommendations for incident reduction. Upon satisfactory completion, students will receive a certificate in OSHA 7505 (Introduction to Accident Investigation).
EHSS 211 - Workers Compensation Legislation for EHS - 3.00 credits
Prerequisite: EHSS 200. This course provides strategies for tracking, monitoring, managing, and avoiding Workers' Compensation incidents. This course reviews which employees are covered, when they are covered, the requirements for benefits and compensation, and the recordkeeping requirements.
EHSS 218 - Industrial Hazard Control - 3.00 credits
Prerequisite: EHSS 200 with a grade of C or higher or concurrent enrollment. This course presents methods to conduct hazard assessments to identify common health, mechanical, electrical and chemical hazards in industry. Students will identify common problems and hazards, locate a supporting regulation or consensus standard and make recommendations to eliminate or control the hazard.
EHSS 230 - Waste Management and Resource Conservation - 3.00 credits
Prerequisite: EHSS 203 with a grade of C or better. Intense coverage of EPA’s Resource Conservation and Recovery Act (RCRA) including pollution prevention, underground storage tanks, treatment options, EPA inspections and hazardous waste manifesting. Special emphasis on hazardous waste determination, accumulation, storage, and related generator issues.
EHSS 275 - Analytical Applications for EHS - 3.00 credits
Prerequisite: MATH 103 or higher. The course covers some of the everyday problems and questions EHS professionals are faced with, such as ergonomics, ventilation, noise, abatement, radiation, thermal stress, hazardous material concentrations, and environmental sampling.
EHSS 290 - EHS Program Capstone - 3.00 credits
Prerequisite: EHSS 200 & EHSS 203. This capstone course is designed to merge the skills and lessons learned into cohesive and comprehensive applications for the discipline. This course will cover the principles of program development and implementation for all types of EHS programs, discusses management styles, and connects students with current professionals to hear the realities of the profession. Students will develop and deliver training, create a written EHS program, and sit for the Occupational Health and Safety Certification (OHST) examination. Upon satisfactory completion, students will receive a certificate for OSHA 7500 (Introduction to Safety and Health Management)